Metal Roofing in Isles of Capri
Isles of Capri is a community within the Naples-Marco Island, FL Metropolitan Statistical Area (Collier County) area of Florida, located in Collier County (population ~1,400). Small unincorporated waterfront/canal community between Naples and Marco Island; high flood/surge exposure and salt-air corrosion concerns similar to Marco Island.
Recommended Metal Roof Types
Standing seam metal roofing (steel or aluminum, mechanically seamed, concealed fasteners)
Best-in-class wind uplift performance, no exposed fasteners to work loose or corrode, qualifies for the strongest wind-mitigation insurance credits, and is the assembly type most likely to carry Miami-Dade NOA / HVHZ approval and Florida Product Approval (FL#) listings needed for HVHZ and wind-borne debris regions.
Aluminum standing seam / panels
Naturally corrosion- and rust-proof, making it the preferred substrate within a few miles of saltwater (barrier islands, Keys, both coasts) where steel would need heavier coating protection; also lightweight for retrofit over existing structures.
Galvalume / coated steel standing seam
Cost-effective alternative to aluminum for inland and non-immediate-coastal homes, with strong corrosion resistance from the aluminum-zinc coating and widely available FL Product Approval listings.
Stone-coated steel metal shingles/tile profiles
Popular in HOA communities and Mediterranean-style neighborhoods that require a tile or shake appearance, letting homeowners get metal's wind/impact performance while meeting deed-restricted aesthetic requirements.
PVDF (Kynar 500)-coated panels in any of the above
The reflective, fade- and chalk-resistant coating is heavily recommended for Florida's intense UV and heat load, supporting Cool Roof energy performance and long-term color retention versus SMP or unpainted coatings.
Weather Perils in Isles of Capri
- Atlantic hurricane season (June-November) with direct Gulf landfall risk — e.g., Hurricane Ian (2022, Cat 4, ~150 mph near Naples/Fort Myers Beach), Hurricane Irma (2017), Hurricane Milton (2024) storm surge/wind on the Gulf side
- Storm surge and coastal/tidal flooding in Naples, Marco Island, Vanderbilt Beach, Isles of Capri, Goodland (Coastal High Hazard Areas, VE flood zones)
- Extreme wind uplift and wind-borne debris (roof tiles, tree limbs) driving impact-resistance and enhanced fastening/uplift-rating requirements
- Salt-air/marine corrosion on the barrier islands and waterfront canal communities (Port Royal, Aqualane Shores, Isles of Capri) favoring Kynar/PVDF-coated aluminum or coated steel over bare galvanized
- Intense afternoon convective thunderstorms and frequent lightning (Collier County is in one of the highest lightning-density areas in the US)
- Heavy wet-season rainfall/ponding (June-Sept) requiring robust panel seams and gutters
- High heat/UV load driving reflective 'cool roof' metal coatings for energy code compliance
- Wildfire risk in the Wildland-Urban Interface fringe near Golden Gate Estates, Immokalee, Ave Maria and the Big Cypress/Picayune Strand preserve edges
Typical Installed Cost
Statewide installed cost is roughly $8-$20 per sq ft depending on material and profile: corrugated/exposed-fastener steel panels run about $3.50-$8/sq ft installed (roughly $8-$16/sq ft including labor per some vendor breakdowns); standing seam steel or aluminum typically runs $10-$20/sq ft installed (some premium/HVHZ-compliant installations reaching $10-$35/sq ft); copper and zinc are the luxury tier at roughly $14-$40/sq ft. For an average ~2,000 sq ft Florida home, total standing seam project costs commonly fall in the $20,000-$40,000 range. Costs run higher in HVHZ jurisdictions (Miami-Dade/Broward) due to NOA-compliant materials, permitting, and inspection requirements.
Neighborhoods We Serve in Isles of Capri
- Capri Estates
- Certified MetalVue metal-roofing pros serving Capri Estates, Isles of Capri.
Find a Certified MetalVue Professional Near Isles of Capri
Tell us about your project and a certified Sherwin MetalVue professional in your area will follow up with a free, no-obligation estimate.
Sherwin-Williams is not liable for the conduct, performance, or workmanship of any contractor.