Metal Roofing in Merritt Island
Merritt Island is a community within the Space Coast (Melbourne-Palm Bay-Titusville, FL Metropolitan Statistical Area) area of Florida, located in Brevard County (population 34k-36k (unincorporated CDP)). Large unincorporated barrier/river island community between the mainland and Cape Canaveral; permitted through Brevard County.
Recommended Metal Roof Types
Standing seam metal roofing (steel or aluminum, mechanically seamed, concealed fasteners)
Best-in-class wind uplift performance, no exposed fasteners to work loose or corrode, qualifies for the strongest wind-mitigation insurance credits, and is the assembly type most likely to carry Miami-Dade NOA / HVHZ approval and Florida Product Approval (FL#) listings needed for HVHZ and wind-borne debris regions.
Aluminum standing seam / panels
Naturally corrosion- and rust-proof, making it the preferred substrate within a few miles of saltwater (barrier islands, Keys, both coasts) where steel would need heavier coating protection; also lightweight for retrofit over existing structures.
Galvalume / coated steel standing seam
Cost-effective alternative to aluminum for inland and non-immediate-coastal homes, with strong corrosion resistance from the aluminum-zinc coating and widely available FL Product Approval listings.
Stone-coated steel metal shingles/tile profiles
Popular in HOA communities and Mediterranean-style neighborhoods that require a tile or shake appearance, letting homeowners get metal's wind/impact performance while meeting deed-restricted aesthetic requirements.
PVDF (Kynar 500)-coated panels in any of the above
The reflective, fade- and chalk-resistant coating is heavily recommended for Florida's intense UV and heat load, supporting Cool Roof energy performance and long-term color retention versus SMP or unpainted coatings.
Weather Perils in Merritt Island
- Atlantic hurricanes and tropical storms (wind + storm surge, Jun-Nov)
- Wind-borne debris region winds (design wind speeds roughly 150-165 mph Risk Category II near the coast per 2023 8th-edition Florida Building Code wind maps, tapering to ~140-150 mph inland)
- Frequent severe thunderstorms and one of the highest cloud-to-ground lightning densities in the US ("lightning capital" of North America)
- Coastal salt-air corrosion on barrier-island homes (Cocoa Beach, Satellite Beach, Indian Harbour Beach, Cape Canaveral, Melbourne Beach, Indialantic, Merritt Island)
- Storm surge / coastal flooding within FDEP Coastal Construction Control Line (CCCL) zones and FEMA V/AE flood zones on the barrier island and Indian River/Banana River lagoon shorelines
- Heavy convective rainfall and localized flash flooding
- High UV/heat load year-round accelerating roof material degradation
- Occasional wildfire risk in scrub/palmetto WUI-adjacent unincorporated areas (Port St. John, Mims, western Palm Bay/Malabar, Canaveral Groves)
Typical Installed Cost
Statewide installed cost is roughly $8-$20 per sq ft depending on material and profile: corrugated/exposed-fastener steel panels run about $3.50-$8/sq ft installed (roughly $8-$16/sq ft including labor per some vendor breakdowns); standing seam steel or aluminum typically runs $10-$20/sq ft installed (some premium/HVHZ-compliant installations reaching $10-$35/sq ft); copper and zinc are the luxury tier at roughly $14-$40/sq ft. For an average ~2,000 sq ft Florida home, total standing seam project costs commonly fall in the $20,000-$40,000 range. Costs run higher in HVHZ jurisdictions (Miami-Dade/Broward) due to NOA-compliant materials, permitting, and inspection requirements.
Neighborhoods We Serve in Merritt Island
- Georgiana
- Kennedy Point
- Newfound Harbor
- North Merritt Island
- Sykes Creek
- Certified MetalVue metal-roofing pros serving Georgiana, Merritt Island.
- Certified MetalVue metal-roofing pros serving Kennedy Point, Merritt Island.
- Certified MetalVue metal-roofing pros serving Newfound Harbor, Merritt Island.
- Certified MetalVue metal-roofing pros serving North Merritt Island, Merritt Island.
- Certified MetalVue metal-roofing pros serving Sykes Creek, Merritt Island.
Find a Certified MetalVue Professional Near Merritt Island
Tell us about your project and a certified Sherwin MetalVue professional in your area will follow up with a free, no-obligation estimate.
Sherwin-Williams is not liable for the conduct, performance, or workmanship of any contractor.