Metal Roofing in Sunrise
Sunrise is a community within the Fort Lauderdale / Broward County area of Florida, located in Broward County (population ~99,000). Inland central-west suburb; full HVHZ; wide mix of 1970s-2000s subdivisions with active HOA review.
Recommended Metal Roof Types
Standing seam metal roofing (steel or aluminum, mechanically seamed, concealed fasteners)
Best-in-class wind uplift performance, no exposed fasteners to work loose or corrode, qualifies for the strongest wind-mitigation insurance credits, and is the assembly type most likely to carry Miami-Dade NOA / HVHZ approval and Florida Product Approval (FL#) listings needed for HVHZ and wind-borne debris regions.
Aluminum standing seam / panels
Naturally corrosion- and rust-proof, making it the preferred substrate within a few miles of saltwater (barrier islands, Keys, both coasts) where steel would need heavier coating protection; also lightweight for retrofit over existing structures.
Galvalume / coated steel standing seam
Cost-effective alternative to aluminum for inland and non-immediate-coastal homes, with strong corrosion resistance from the aluminum-zinc coating and widely available FL Product Approval listings.
Stone-coated steel metal shingles/tile profiles
Popular in HOA communities and Mediterranean-style neighborhoods that require a tile or shake appearance, letting homeowners get metal's wind/impact performance while meeting deed-restricted aesthetic requirements.
PVDF (Kynar 500)-coated panels in any of the above
The reflective, fade- and chalk-resistant coating is heavily recommended for Florida's intense UV and heat load, supporting Cool Roof energy performance and long-term color retention versus SMP or unpainted coatings.
Weather Perils in Sunrise
- Hurricanes and tropical storms (Atlantic hurricane season June-November)
- High Velocity Hurricane Zone (HVHZ) wind-borne debris and uplift requirements per Florida Building Code Chapter 16/HVHZ provisions
- Design ultimate wind speeds (Vult) roughly 170-183 mph along the coast, tapering to the mid-160s-170s mph inland
- Salt-air / coastal corrosion on barrier islands and Intracoastal waterway frontage
- Intense convective/afternoon thunderstorms and lightning (May-October)
- Flooding, king tides, and storm surge in low-lying coastal and canal-adjacent neighborhoods (much of the county is drained Everglades muck laced with canals)
- Wildfire/WUI exposure along the western edge abutting Everglades/Water Conservation Area lands (Southwest Ranches, western Weston, western Pembroke Pines/Davie)
- UV/heat exposure driving demand for reflective, high-SRI 'cool roof' coatings
Typical Installed Cost
Statewide installed cost is roughly $8-$20 per sq ft depending on material and profile: corrugated/exposed-fastener steel panels run about $3.50-$8/sq ft installed (roughly $8-$16/sq ft including labor per some vendor breakdowns); standing seam steel or aluminum typically runs $10-$20/sq ft installed (some premium/HVHZ-compliant installations reaching $10-$35/sq ft); copper and zinc are the luxury tier at roughly $14-$40/sq ft. For an average ~2,000 sq ft Florida home, total standing seam project costs commonly fall in the $20,000-$40,000 range. Costs run higher in HVHZ jurisdictions (Miami-Dade/Broward) due to NOA-compliant materials, permitting, and inspection requirements.
Neighborhoods We Serve in Sunrise
- Sawgrass Estates
- Springtree
- Sunrise Golf Village
- Sunrise Lakes
- The Fountains
- Certified MetalVue metal-roofing pros serving Sawgrass Estates, Sunrise.
- Certified MetalVue metal-roofing pros serving Springtree, Sunrise.
- Certified MetalVue metal-roofing pros serving Sunrise Golf Village, Sunrise.
- Certified MetalVue metal-roofing pros serving Sunrise Lakes, Sunrise.
- Certified MetalVue metal-roofing pros serving The Fountains, Sunrise.
Find a Certified MetalVue Professional Near Sunrise
Tell us about your project and a certified Sherwin MetalVue professional in your area will follow up with a free, no-obligation estimate.
Sherwin-Williams is not liable for the conduct, performance, or workmanship of any contractor.