Metal Roofing in El Paso
El Paso is a hub of the El Paso area of Texas, located in El Paso County (population ~680,000 (core city; largest city in the metro and 6th-largest in TX)). By far the largest local-page opportunity; consider splitting into West Side, Central/Downtown, Northeast, and Lower Valley sub-hubs. West Side foothill homes back up to Franklin Mountains State Park (WUI/wildfire consideration); Northeast and East El Paso are the newest, fastest-growing tract-home areas.
Recommended Metal Roof Types
Standing seam steel (concealed fastener, 24-26 gauge, PVDF/Kynar 500 finish)
Best overall performer for hurricane wind-uplift resistance (rated systems tested to 120-150+ mph), thermal movement tolerance in extreme heat swings, and premium curb appeal for Hill Country and coastal custom homes; concealed fasteners eliminate the leak points that fail first in wind events.
Stone-coated steel shingle/tile profile
Popular where HOAs or historic character require a traditional shingle or tile look (San Antonio, Central Texas Spanish-style neighborhoods) while gaining Class 4 impact rating for hail and better wind performance than composition shingle.
Aluminum standing seam
Preferred within a few miles of the Gulf Coast (Galveston, Corpus Christi, Port Aransas) because it will not rust from salt-air corrosion the way coated steel eventually can.
Exposed-fastener steel (26-29 gauge ag panel)
Cost-effective, widely used on rural ranch homes, barns, and outbuildings across West and Central Texas; lower upfront cost but requires more maintenance of fastener seals in high-UV/thermal-cycling climate.
Class 4 impact-rated metal panels (any profile)
Specifically marketed and installed to qualify for Texas insurer hail-discount programs given the DFW/Central Texas hail corridor is the top loss driver in the state.
Weather Perils in El Paso
- Spring dust storms / haboobs with damaging straight-line gusts (occasionally 60-75+ mph)
- Extreme summer heat and intense UV/solar loading (100+ record highs)
- North American monsoon (Jun-Sep) bringing sudden intense thunderstorms, hail, and flash flooding in normally dry arroyos
- High elevation desert wind exposure driving ASCE 7 design wind speeds near 100-105 mph
- Rare but sometimes severe winter storms/freezes (e.g., Feb 2021 Winter Storm Uri) causing ice-dam and thermal-cycling stress
- Very low annual rainfall (~8-9 in/yr) and drought, which stresses asphalt shingles via UV/thermal cycling more than moisture
- Wildland-urban interface brush-fire risk in Franklin Mountains foothill lots and rural desert-fringe suburbs
Typical Installed Cost
Installed residential metal roofing in Texas typically runs about $9-$16 per sq ft for standing seam steel (roughly $850-$1,600 per square/100 sq ft), $6-$10 per sq ft for exposed-fastener steel panels, and $10-$18+ per sq ft for aluminum standing seam or premium stone-coated steel systems, before insurance offsets; complex Hill Country rooflines, steep pitches, and coastal wind-rated assemblies push toward the higher end.
Neighborhoods We Serve in El Paso
- Cielo Vista
- Coronado
- Country Club
- Kern Place
- Mission Hills
- Mission Valley / Ysleta
- Painted Dunes / Northeast
- Sunset Heights
- Three Hills (Upper Valley)
- Vista Hills
- Certified MetalVue metal-roofing pros serving Cielo Vista, El Paso.
- Certified MetalVue metal-roofing pros serving Coronado, El Paso.
- Certified MetalVue metal-roofing pros serving Country Club, El Paso.
- Certified MetalVue metal-roofing pros serving Kern Place, El Paso.
- Certified MetalVue metal-roofing pros serving Mission Hills, El Paso.
- Certified MetalVue metal-roofing pros serving Mission Valley / Ysleta, El Paso.
- Certified MetalVue metal-roofing pros serving Painted Dunes / Northeast, El Paso.
- Certified MetalVue metal-roofing pros serving Sunset Heights, El Paso.
- Certified MetalVue metal-roofing pros serving Three Hills (Upper Valley), El Paso.
- Certified MetalVue metal-roofing pros serving Vista Hills, El Paso.
Find a Certified MetalVue Professional Near El Paso
Tell us about your project and a certified Sherwin MetalVue professional in your area will follow up with a free, no-obligation estimate.
Sherwin-Williams is not liable for the conduct, performance, or workmanship of any contractor.