Metal Roofing in Southlake
Southlake is a community within the Dallas area of Texas, located in Tarrant County (population ~32,000, high-income). City of Southlake has some of the most stringent residential design-review standards in the metroplex (Southlake DPR guidelines); premium standing-seam and slate-look stone-coated steel are common on move-up/luxury estate homes.
Recommended Metal Roof Types
Standing seam steel (concealed fastener, 24-26 gauge, PVDF/Kynar 500 finish)
Best overall performer for hurricane wind-uplift resistance (rated systems tested to 120-150+ mph), thermal movement tolerance in extreme heat swings, and premium curb appeal for Hill Country and coastal custom homes; concealed fasteners eliminate the leak points that fail first in wind events.
Stone-coated steel shingle/tile profile
Popular where HOAs or historic character require a traditional shingle or tile look (San Antonio, Central Texas Spanish-style neighborhoods) while gaining Class 4 impact rating for hail and better wind performance than composition shingle.
Aluminum standing seam
Preferred within a few miles of the Gulf Coast (Galveston, Corpus Christi, Port Aransas) because it will not rust from salt-air corrosion the way coated steel eventually can.
Exposed-fastener steel (26-29 gauge ag panel)
Cost-effective, widely used on rural ranch homes, barns, and outbuildings across West and Central Texas; lower upfront cost but requires more maintenance of fastener seals in high-UV/thermal-cycling climate.
Class 4 impact-rated metal panels (any profile)
Specifically marketed and installed to qualify for Texas insurer hail-discount programs given the DFW/Central Texas hail corridor is the top loss driver in the state.
Weather Perils in Southlake
- Severe hail — DFW is one of the most hail-prone metros in the US (frequent Class 3-4+ hail events, major driver of roof-replacement demand and insurer Class 4 impact-resistant discounts)
- Tornadoes and straight-line/downburst winds — North Texas sits at the eastern edge of Tornado Alley and sees frequent spring/early-summer severe thunderstorm and tornado outbreaks
- High wind gusts from severe thunderstorm complexes (not hurricane-driven; ASCE 7 design wind speeds ~105-115 mph Vult, well below Gulf Coast)
- Occasional winter ice storms (freezing rain) causing ice accumulation and roof/gutter loading, plus rare extreme cold events (e.g., Feb 2021 Winter Storm Uri)
- Intense summer UV exposure and heat (100°F+ stretches) driving thermal cycling and demand for reflective/cool-roof coatings
- Expansive clay soils (regional foundation-movement issue, indirectly stresses roof lines/flashing over time)
- Heavy, fast-moving thunderstorm downpours with localized flash flooding (less a roofing peril, relevant for gutter/drainage sizing)
Typical Installed Cost
Installed residential metal roofing in Texas typically runs about $9-$16 per sq ft for standing seam steel (roughly $850-$1,600 per square/100 sq ft), $6-$10 per sq ft for exposed-fastener steel panels, and $10-$18+ per sq ft for aluminum standing seam or premium stone-coated steel systems, before insurance offsets; complex Hill Country rooflines, steep pitches, and coastal wind-rated assemblies push toward the higher end.
Neighborhoods We Serve in Southlake
- Carillon
- Estes Park
- Monticello
- Timarron
- Certified MetalVue metal-roofing pros serving Carillon, Southlake.
- Certified MetalVue metal-roofing pros serving Estes Park, Southlake.
- Certified MetalVue metal-roofing pros serving Monticello, Southlake.
- Certified MetalVue metal-roofing pros serving Timarron, Southlake.
Find a Certified MetalVue Professional Near Southlake
Tell us about your project and a certified Sherwin MetalVue professional in your area will follow up with a free, no-obligation estimate.
Sherwin-Williams is not liable for the conduct, performance, or workmanship of any contractor.